Search by Brand

Superior Radiant Gas Fired Infrared Tube Heaters and High Intensity Heaters, UA series, UX series, UXR series, UA100, UA125, UA150, UA80, UA/UX, TA, TX, TXR, TA100, L series, low ceiling tube heatersEnerco High Intensity Infrared Heaters, 8060 NPP, 8060 NDSP-5, 4040 LPP, 4040 NDSP-5, 4040 LA-5, 4040 LPP, H25N, H22L, HS25N, HS25L, MH25N, MH22L, 9100SRinnaiChromalox HVH, KUH Electric Garage and shop heatersFostoria Industries (TPI, Corp.)Mr. Heater, MH42T, MH24T, MH12T, H25N, H22L, Construction Heater, outdoor heater, salamander heater, HS55FAV, MH55FAV, HS80CV, MH80 CV, HS200CV, MH200VCQmark

Looking for an Infrared Tube Heater?

Over the past 25 years, gas infrared heaters have gained in popularity to the point where they are now the standard in heating garages, shops, warehouses, auto service centers, manufacturing facilities, farm buildings and more.


Infrared heating is more energy efficient than conventional forced air heating in large open spaces. In fact, during the past decade forced air unit heaters have taken a back seat to infrared heaters. Infrared is now the rule rather than the exception.

What is infrared?

Infrared is electromagnetic wave energy. Like light, infrared (radiant) energy travels at the speed of light in a straight line until it strikes an object. Any hot surface emits infrared energy. Think of your oven, stove, fireplace and our own sun.

How does infrared heating work?

A gas fired infrared tube heater or high intensity heater (normally ceiling suspended) emulates the warmth of the sun by generating radiant energy that converts to useable heat when absorbed by objects in its path. In buildings, objects such as floors, tools and machinery absorb the infrared radiant energy. This creates a "heat sink" where warmth is stored and re-radiated to warm the surrounding air.

Can infrared cut my fuel costs?

Yes. It is not unusual to generate fuel savings of 30% or more compared to forced air heating methods such as unit heaters. In high bay structures, forced air heaters are impractical because warm convective air rises to the ceiling, leaving floors relatively cold. In fact, warm air must stratify from the ceiling downward to keep people warm at the floor level. Consequently, building owners find that their forced air heaters run almost continually, only to find an outrageous monthly fuel bill.

By contrast, infrared heaters emit quiet radiant energy to the floors, which absorb and re-radiate heat from the ground up. This translates to warm, comfortable conditions at the people zone and less wasted convective heat at the ceiling. In immense structures such as warehouses and aircraft hangars, infrared heat is the only practical choice for creature comfort and energy savings.

Are there any negative side effects from standing under an infrared heater?

Infrared heaters do get hot, so proper mounting distances and clearance requirements must be met. However, there are no harmful effects from the radiant heat energy. Unlike the sun, infrared heaters do not produce ultra-violet rays, only comfortable radiant warmth, like standing by a fireplace or stove.

Do some infrared heaters perform better than others?

Yes. Every infrared heater manufacturer will say different things about why they feel their product is the best. You may need to sift through the jargon to find out for yourself what makes one appliance brand better than another. Most high intensity infrared heater brands have few differences in performance. The same cannot be said for infrared radiant tube heaters.

So what criteria should I use to select an infrared tube heater brand?

We suggest looking at the criteria specifiers use to determine performance and reliability. These criteria are:

Reflector design (the most important factor in radiant efficiency)

Control box design (controls should be isolated out of the air stream)

Serviceability (easy control access and easy to diagnose problems)

Burner design (affects heat uniformity)

Emitter tubing (hot rolled? Aluminized? Heat-treated aluminized?)

Couplings (connects the radiant tubes together - how good are they?)

If you’re looking for an infrared heater or multiple infrared heaters, use the aforementioned criteria to help you make an educated buying decision.

Just as importantly, buy from a reputable distributor with years of experience in the infrared industry. A good distributor will have the skills to help you size a heater or system to meet your exact requirements and should do this free of charge. Make sure the company you choose to buy from has the strength and staying power to ensure that you will have all the support you need before, during and long after the sale is made. Should you need any technical assistance, parts or other service down the road, you’ll want to be comfortable knowing you’ll be taken care of. That’s essence of good business.

Scott Workman owns and operates Infra-Red Products Supply, Inc. of Draper, Utah. In business since 1986, Infra-Red Products has become recognized as one of the foremost leaders in energy saving heating system design and sales for residential, commercial and industrial consumers.

Search by Category

Garage & Shop Heaters
Radiant Tube Heaters
High Intensity Infrared Heaters
Direct Vent Wall Heaters
Patio & Outdoor Heaters
Vent Free Heaters
Free Articles
Thermal Area Treatment Heaters (Bed Bug Remediation)
Wash Bay Heaters